Sony MZ-RH910 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual page 78

Message
DATA SAVE
DC IN TOO
HIGH
DISC FULL
DOWNLOAD
READY
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
END
ERROR
ERROR XX
FOLDER NO
EXPAND
FORMAT
ERROR DISC
GROUP FULL
HOLD
IN MENU
LOW BATTERY • Batteries are weak.
MEMORY
OVER
NO
BOOKMARKED
TRACK
78
Meaning/Remedy
• The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
• Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
• Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
• MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to
to eject the disc from the recorder or disconnect the dedicated USB cable.
• The recorder reached to the end of the disc while playing or pressing >.
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76.
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76. If the message
appears again, please consult your nearest Sony dealer.
• You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion beyond
this level is not possible.
• A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
• A disc formatted on the computer was inserted.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
• You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a disc used in MD mode.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a disc used in MD mode) on a disc. Keep the group
number within 255 or 99.
• The recorder is locked.
, Slide HOLD against the arrow to unlock the recorder (page 18).
• You pressed a key on the remote control while selecting a menu on the
recorder.
, Charge the rechargeable battery or replace the dry battery (page 17).
• You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
• You selected bookmark play without setting bookmarks.
, Set bookmarks (page 41).
"Software Operation"
section.