Table of Contents
Advertisement
E. Error Messages
This appendix describes error messages of the CE50-10.
• Error messages at unit startup
• LAN error messages
• SoC (System-on-a-chip) temperature error messages
• Resource shortage error messages
• I/O board error messages
E.1 Error messages at unit startup
Table E‒1: Error messages at unit startup
Message ID
KXBT001-W
FScheck failed.(dev=XXXX)
XXXX: Device file name
KXBT002-W
SMART RETURN STATUS is XXX.
XXX: SMART RETURN STATUS value
KXBT010-E
Ethernet device check failed.
(Bus=X Device=Y Func=Z)
X: Bus number, Y: Device number, Z: Function
number
KXBT011-W
PCI device check failed.(Bus=X
Device=Y Func=Z)
X: Bus number, Y: Device number, Z: Function
number
KXBT030-E
Core check failed. (core=N)
N: Number of detected cores
Physical memory check failed
KXBT040-E
(DRAM= X)
X: Installed memory capacity (KB)
KXBT020-I
GPIO data is as follows.
xx xx xx xx
(GPIO data is dumped in hexadecimal.)
No ID
Max GPU frequency error.(freq=
X MHz)
X: Detected maximum GPU frequency
E.2 LAN error messages
Table E‒2: LAN error messages
Message ID
KXDL001-W
Ethernet adapter(ethX) Link is
down.
ethX: Interface name
Message
Message
Cause (meaning)
File system error
None
SMART STATUS error
A unit failure has occurred or a sign of
potential failure has been detected.
Replace the unit.
LAN controller error
PCI device error other
than LAN
Abnormal number of
cores
Main memory capacity
error
GPIO log acquired
There is no information, or there is no
action to be taken.
Maximum GPU
None
frequency error
Cause (meaning)
Link disconnected
1. Check the power supply state at
E. Error Messages
Action
Action
the connection destination.
163
Advertisement
Table of Contents
Troubleshooting
