Table of Contents
Advertisement
3. Flush out the debris by running water through the
nozzle in the same direction as the dislodging tool
was inserted.
4. Reinstall nozzle and venturi. Do not overtighten!
5. Reassemble pump per instructions on Pages 8 and
9.
HELPFUL HINTS
How to Handle a Gaseous Well
In some areas well water contains gases which must be
allowed to escape before the water is used. This can be
done as shown in Figure 9.
A good way of delivering gas-free water is to suspend
a pipe, closed at the bottom and open at the top, sur-
rounding the suction pipe. Since the gases rise in the
well casing, the water sucked down through the pipe
and into the suction pipe is free of gas. This type of
well must be vented to the outside of any enclosure.
HELPFUL HINTS
Figure 9
10
Gases
rise to
surface
Pipe strap or
wire to hold
pipe sleeve
Tail
pipe
Not
Foot
to
valve
Scale
Pipe
2369 0396
sleeve
Pipe
cap
Advertisement
Table of Contents
