Changing Backlight Settings (Brightness) - Yamaha 6YC INFORMATION STATION Operation Manual

TIP:
• "Current" indicates the elapsed hours
since the previous maintenance (reset).
• "Interval" indicates the recommended in-
terval between maintenances.
3. To reset the maintenance schedule, use
the [ ] (Up/Down) buttons on the di-
rectional keypad to select the engine.
Set using the [SET] button.
TIP:
• Reset All: This option is available for a
twin-engine application only. It resets the
maintenance schedule of both engines.
• STD: Displays and resets the current
maintenance schedule of each engine.
• It is not possible to change the mainte-
nance interval (100 h).
■ Changing backlight settings (Bright-
ness)
In the "Brightness" menu, the brightness lev-
el of the backlight can be adjusted and
changeover time between Day and Night
screens can be configured for all meters syn-
chronously.
1. Use the directional keypad and the [SET]
button to select "Brightness" in the
"MENU" screen. The "BRIGHTNESS"
screen is displayed.
2. Use the [ ] (Up/Down) buttons on the
directional keypad to select the item.
Use the [ ] (Left/Right) buttons on the
directional keypad to change the set-
tings.
Set using the [SET] button.
TIP:
• Dimmer: Adjusts the brightness level of the
backlight. The brightness level can be ad-
justed in 5 levels. The backlight turns off
when the level is set to zero.
• SYNC: When "On" is selected, the settings
are synchronously applied to all the con-
nected meters.
• Day & Night: When "Night" is selected, the
brightness of the screen is reduced to half
of that of the Day screen. When "Auto" is
selected, the screen switches between
Day and Night screens at the changeover
time preset with "Auto Timer Setting".
• Auto Timer Setting: Allows to configure the
changeover time from Day screen to Night
screen, and vice versa. The changeover
time can be set between AM 0:00 and PM
11:45 in 15-minute increments.
• Even when "Auto" is selected, the Day
screen is displayed if time information can-
not be received from the GPS.
• Pressing the [SET] button will also switch
the display to the "BRIGHTNESS" screen.
MENU screen
22