Wi-Fi Connectivity - Huawei TE30 Product Overview

TE30 Videoconferencing Endpoint
Product Overview
l
l
l
l

5.8 Wi-Fi Connectivity

The endpoint has a built-in Wi-Fi module and is able to function as a Wi-Fi client, a Wi-Fi
server, or both simultaneously. The maximum bandwidth is 54 Mbit/s and the frequency is 2.4
GHz.
If the endpoint has the Wi-Fi client function enabled, it automatically detects and connects to
Wi-Fi servers. You can set the endpoint IP address in DHCP or static mode. If a wired
network deployment is not suitable, the endpoint can connect to the Internet through a
wireless router. Therefore, the Wi-Fi client can be enabled when wired networks are
unavailable and the endpoint needs to access networks through wireless routers.
If the endpoint has the Wi-Fi server function enabled, it can connect to a VPM220W
(Huawei's wireless microphone array) through Wi-Fi, eliminating the need for physical
connections.
If a user also purchases a wireless microphone or touch panel, the user can connect it to an
endpoint through Wi-Fi to control the product.
Figure 5-7
Issue 03 (2018-06-30)
Local conference
The RSE server's IP address is set on the endpoint, and neither the endpoint or the RSE
server needs to be registered with a GK server.
Multipoint conference hosted by SMC2.0
An SMC2.0 uniformly allocates RSE resources. The SMC2.0 sends RSE site
information to the MCU, and the MCU adds the specified RSE to the conference to
enable recording. Operations such as starting conference recording and configuring the
RSE server can be performed on the SMC2.0. The SMC2.0 also supports automatic
conference recording and automatic activation of the conference recording function.
Multipoint conference directly initiated from the endpoint
The endpoint and RSE server need to be registered with a GK server. The URL or IP
address of the RSE server needs to be configured on the endpoint. During a multipoint
conference, the chair site and the site where the built-in MCU is used can perform
recording operations.
Multipoint conference hosted by a built-in MCU
Conferences are recorded by the RSE server without the participation of the MCU.
Neither the endpoint or RSE server needs to be registered with a GK server. The
endpoint adds the RSE server to the conference by calling the IP address of the RSE
server, after which the RSE server allocates recording resources and completes the
recording task. This mode is simple, flexible, and convenient.
shows the Wi-Fi network.
Copyright © Huawei Technologies Co., Ltd.
5 Functions and Features
20