Set Password; Backup Setting; Reset Setting - D-Link DWL-P1012 User Manual

Set Password

A password is an invaluable tool for the manager to secure the management
interface of the DWL-P1012, use this function to change the password.
If you forget the password, press the "Reset" button in the front panel of the
DWL-P1012 for 10-15 Seconds. All current settings such as Port Settings,
SNMP, etc. will be lost and the DWL-P1012 will be restored to the factory
default settings.

Backup Setting

The backup tools allow one to create backup files of current settings of the
DWL-P1012. To generate a configuration backup file, press the "Backup" button.
To restore a configuration backup file to the device, browse to the location of the
backup file on the local Hard Drive and press the "Restore" button to reconfigure
with the settings of the recorded file.
Note: when restoring a backup configuration file, the current admin password
will not be erased.

Reset Setting

The Factory Reset button will reset the device back to factory default settings.
Be aware that all configuration data will be lost, and the IP address of the device
will revert to the default value of 192.168.0.1.
39