Connections - D-Link Air DWL-900AP User Manual

Connections

Rear Panel
Power
Plug in the AC/DC adapter here. Please make sure to plug in adapter to the Wireless
Access Point before plugging the other end of the power adapter to an electrical
5V=1A
wall outlet or power strip.
The USB console port is used to make the USB connection from the device to a
Console computer with the USB cable for first time configuration and configuration using the
Wireless AP USB Utility.
The Ethernet port is used to connect the Wireless Access Point to the Ethernet LAN or a
Ethernet
single computer using an Ethernet cable (RJ-45).
Note: To use the USB port on the Wireless Access Point, the computer that performs
the configuration must have a USB interface with Windows XP, 2000, 98, or ME
installed. USB is not supported under Windows NT or Windows 95.
Caution: Use only the power adapter included with the
Connections
device!
6