DNS Relay Settings
Click on Servers in the menu bar, and then click DNS Relay below it. The DFL-1100
contains a DNS Relay function that can be configured to relay DNS queries from the internal
LAN to the DNS servers used by the firewall itself.
Enable DNS Relayer
Follow these steps to enable the DNS Relayer.
Step 1. Enable by checking the Enable DNS Relayer box.
Step 2. Enter the IP numbers that the DFL-1100 should listen for DNS queries on.
Note: If "Use address of LAN interface" is checked, you do not have to enter an IP in IP
Address 1, as the firewall will know what address to use.
Click the Apply button below to apply the settings or click Cancel to discard changes.
Disable DNS Relayer
Follow these steps to disable the DNS Relayer.
Step 1. Disable by un-checking the Enable DNS Relayer box.
Click the Apply button below to apply the settings or click Cancel to discard changes.
70