D-Link AirPlus DI-614+ Manual page 51

Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure mode.



Make sure the wireless client is associated and joined with the
correct router. To check this connection: Right-click on the Local Area
Connection icon in the taskbar> select View Available Wireless Networks.
The Connect to Wireless Network screen will appear. Please make
sure you have selected the correct available network, as shown in
the illustrations below.
Check that the IP Address assigned to the wireless adapter is within the
same IP Address range as the gateway. (Since the DI-614+ has an IP
Address of 192.168.0.1, wireless adapters must have an IP Address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP
Address; no two devices may have the same IP Address. The subnet
mask must be the same for all the computers on the network.) To
check the IP Address assigned to the wireless adapter, double-click on
the Local Area Connection icon in the taskbar > select the Support tab
and the IP Address will be displayed. (Please refer to Checking the IP
Address in the Networking Basics section of this manual.)
If it is necessary to assign a Static IP Address to the wireless adapter,
please refer to the appropriate section in Networking Basics. If you are
entering a DNS Server address you must also enter the Default Gateway
Address. (Remember that if you have a DHCP-capable router, you
will not need to assign a Static IP Address. See Networking Basics:
Assigning a Static IP Address.)
Default
51