Samsung CY-SWR1100 User Manual page 14

After selecting the Dynamic IP Address Internet connection method, the following page will appear:
The following parameters can be configured:
MAC Address: Enter the MAC address of the Internet gateway (plugged into the Internet port of this device) here.
Clone Button: If the configuration PC also acts as the Internet gateway, then click on the Clone Your PC's MAC
Address button to copy the PC's MAC address into the space provided. If you're not sure, leave the
MAC Address field blank.
Host Name: Enter the host name used here. You may also need to provide a Host Name. If you do not have or
know this information, please contact your ISP.
Click on the Prev button to return to the previous window. Click on the Next button to continue to the next step.
Click on the Cancel button to discard the changes made and return to the Internet home page.
Configure your Internet Connection: PPPoE Connection
After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters can be configured:
Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP
address. PPPoE usually requires a Dynamic IP configuration.
IP Address: Enter the PPPoE IP address used here. This option is only available if Static IP is selected.
User Name: Enter the PPPoE account user name used here. This information is given by the ISP.
Password: Enter the PPPoE account password used here. This information is given by the ISP.
Verify Password: Re-enter the PPPoE account password used here.
Service Name: This optional field enables the user to enter a service name to identify this Internet connection here.
Click on the Prev button to return to the previous window. Click on the Next button to continue to the next step.
Click on the Cancel button to discard the changes made and return to the Internet home page.
S W r u
amSung ireleSS outer Ser
m
anual
P 14
age