Recording Audio
Microphone Attenuator (Built-in Microphone)
If the audio level is too high and the audio sounds distorted while recording with the built-in
microphone, activate the microphone attenuator (20 dB).
Operating modes:
1 Set [— Audio Scene] to [„ Custom Setting] (A 76).
80
2 Open the [Built-in Mic Att.] screen.
[FUNC.]
[MENU]
>
3 Touch the desired option and then touch [X].
Options
( Default value)
[
2
Automatic]
necessary for optimal audio recording levels so high audio levels will not be distorted.
The built-in microphone attenuator will be activated at all times to reproduce more faithfully
[
i
On]
the sound dynamics. å will appear on the screen.
The built-in microphone attenuator will be deactivated at all times.
j
[
Off]
screen.
Low Cut Filter (MIC Terminal)
When you are recording using a microphone connected to the MIC terminal, you can activate the low
cut filter to reduce the sound of blowing wind, a car's engine and similar ambient sounds.
Operating modes:
1 Open the [MIC Low Cut] screen.
[FUNC.]
[MENU]
>
2 Touch [i On] and then touch [X].
NOTES
• When recording in surroundings unaffected by wind or if you want to record low-frequency sounds,
we recommend setting [MIC Low Cut] to [j Off].
[Built-in Mic Att.]
>
p
>
The camcorder will automatically activate the built-in microphone attenuator as
[MIC Low Cut]
>
p
>
will appear on the