Miele B 2312 Operating Instructions Manual page 43

Completing the rinsing process
Make sure that the metal contact discs at the top of the
residual water container are cleaned and dried properly.
These metal discs send a signal to the appliance when the
residual water container is full or if it is not in the
appliance. The discs will not convey these signals if they
are dirty or damp.
^ Insert the residual water container after a short interval
(approx. 20 seconds) so that it clicks into place.
The 2 indicator light goes out.
The Fashion Master is ready to use again when it has heated
up.
Until the empty residual water container is replaced, no
steam can be produced.
When the * indicator light comes on, you can use steam
again.
Cleaning and care
43