Recording - Panasonic SC-VKX95 Operating Instructions Manual

Table of Contents

Advertisement

█ Manual presetting
1
Press [3] or [5] (main unit: [5/6] or
[2/3]) to tune in to the station and then press
[OK].
"PGM" is shown.
2
Press the numeric buttons to select a preset
number.
The new station replaces any station that occupies
the same preset number.
Do steps 1 and 2 again to preset more stations.
█ Selecting a preset station
Press the numeric buttons, [2] or [6] to select the
preset station.
Using the main unit
1
Press [TUNE MODE] to select "PRESET".
2
Press [ 2 / 3 ] or [ 5 / 6 ] to select the preset
station.
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [RADIO/AUX] to select "FM" or "AM".
2
Press and hold [RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• After you change the setting, preset frequencies are
erased.

Recording

This system can record up to the followings depending
on the available storage capacity of the USB device in
USB B
and the mode selected:
• MP3 disc and CD-DA to
− 255 folders or a total of 4000 tracks.
• USB A-AUDIO and others to
− 800 folders (maximum 999 tracks in an album) or a
total of 8000 tracks.
To check storage space
In the stop mode (except for DVD/CD, USB A-VIDEO
and USB B-VIDEO), press [FL DISPLAY].
• "UPDATE" is shown when the system is reading the
device.
• "NODEVICE" is shown if there is no USB device
USB B
connected to
.
Panasonic cannot be held responsible on the action of
consumer to record copyrighted contents which can
cause copyright infringement.
Note:
All recordings are in ".mp3" format.
You cannot do recording when you are using random
playback mode.
You cannot do recording when DJ jukebox is switched on.
Repeat playback mode is off during recording.
A new album is added each time you do a recording.
The sequence of album may change after the recording.
The recordings are kept in a folder named "REC_DATA" in
the USB device.
USB status indicator blinks in red during USB recording.
Basic recording
1
Select the source you want to record.
CD-DA
Prepare the disc playback mode (
mode")
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment
( Z 22, "External equipment").
2
Press [USB REC 7/9] to start recording.
The name of the folder that keeps the recording is
shown.
Stop
Press [8]. "WRITING" is shown.
recording
Pause
Press [USB REC 7/9] during recording.
recording
Press again to continue recording.
Note:
You can pause during recording from
radio, AUX 1 or AUX 2 (except in
SYNCHRO mode). A track mark is added
every time you pause ( Z 18, "Adding
track marks").
Note:
Wait for a few seconds for the system to prepare the USB
device before recording starts.
When the next track of the CD-DA disc is being recorded, it
will be shown on the display.
USB B
USB B
12, "Play
Z
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents