Brother DCP-395CN Quick Setup Manual page 16

Safety and Legal
To use the machine safely
Please keep these instructions for later reference and read them before attempting any maintenance.
WARNING
There are high voltage electrodes inside the machine.
Before you clean the inside of the machine, make sure you
have unplugged the power cord from the electrical socket.
Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this may
cause an electrical shock.
DO NOT pull on the middle of the AC power cord. Doing
this may cause an electrical shock.
DO NOT use flammable substances, any type of spray
liquid or aerosol cleaners to clean the inside or outside of
the machine. Doing this may cause a fire or electrical
shock.
Unplug this product from the wall socket before cleaning
the inside of the machine.
If the machine becomes hot, releases smoke, or generates
any strong smells, immediately turn off the power switch
and unplug the machine from the electrical socket. Call
your Brother dealer or Brother Customer Service.
If metal objects, water or other liquids get inside the
machine, immediately unplug the machine from the
electrical socket. Call your Brother dealer or Brother
Customer Service.
This product must be installed near an electrical socket
that is easily accessible. In case of an emergency, you
must unplug the power cord from the electrical socket to
shut off the power completely.
This product should be connected to an AC power source
within the range indicated on the rating label. DO NOT
connect it to a DC power source or inverter. If you are not
sure, contact a qualified electrician.
16