Error Codes - Automatic Coffee Maker
Possible Solutions
Some coffee makers have an LED display which may show an error code. The error codes can mean different things
depending upon which model you have.
Models that start with KCM5
Error
Information
Code
If the coffee maker is near an outside wall in a cold climate, or
Err1
if the water is quite cold, this error may display.
An electrical component has been dislocated within the coffee
Err2
maker.
Err4
Stuck button
Model: KCM111
Err1 - A button may be jammed. Unplug the coffee maker and press each button several times. Plug the coffee maker
into a grounded 3-prong outlet. If "Er1" appears again on the display, repeat this procedure.
Model: KCM1402
Err2 - If the brewing cycle does not complete within 15 minutes, the coffee maker will display an Err2. This can occur if
the heater is not working properly.
Model: KCM0802
Error
Information
Code
1
It means Motor Error
https://producthelp.kitchenaid.com/Countertop_Appliances/Coffee_Products/Automatic/Troubleshooting/Error_Codes_-_Auto...
Resolution
Reset the unit by unplugging and plugging back in. Then resume
brewing.
Resolution
Move the coffee maker to a warmer
location or us slightly warmer water.
There is no repair for this issue.
Press and release all buttons on the
coffee maker.
Updated: Mon, 16 Aug 2021 01:47:22 GMT
Powered by
1