Installation & Operation; Notes On Installation - Siemens SIMATIC RTLS System Manual

Figure 7-4
7.4.2 Installation & Operation
7.4.2.1

Notes on installation

Before you install the devices, read this section carefully to ensure trouble-free installation and
operation.
The devices can only be used in conjunction with the RTLS localization system. Setup,
installation and use of the tools and clients of the RTLS localization system are described in the
corresponding manuals.
For commissioning, you first need to pull a marked insulating film from the housing to enable
the power supply and thus the functioning of the device.
Remove the batteries from the device when you are returning it.
Mount the device so that it has a direct line-of-sight connection to the anchors/gateways (360°
panorama view). Any type of material can impact localization. Localization through metal is not
possible. Localization through radio reflections is possible in this case which results in an
inaccurate localization.
Check the device for damages before you use it so that it is not damaged during operation.
Protect the display from objects that could scratch or otherwise damage it. The specified
operating temperature ranges must be observed.
The device contains a lithium battery.
Fires and burns
Improper handling of batteries can lead result in fires and burns.
The housing of the device must not be squashed, punctured or exposed to other mechanical
influences. It may only be opened to change batteries. Make sure that you observe the polarity
of the batteries (marking on the battery insert).
Never expose the device to fire, temperatures above 50 °C or direct sunlight for an extended
period of time.
Remove the storage and transport protection to commission the battery. To do this, pull out the
plastic film that is visible on the battery compartment. It is not necessary to loosen the screws
of the battery cover for this purpose.
Operating the device
The device is operated using the buttons on the front. The functioning of the button can also be
defined by means of optional software functionality.
System Manual, 04/2019, C79000-G8976-C577-01
Dimension drawing SIMATIC RTLS4084T - All dimensions specified in millimeters
CAUTION
Transponder
7.4 SIMATIC RTLS4084T
151