Silvercrest SSBS 3.0 A1 Manual page 12

♦ Press and hold the
to turn on the remote trigger 8 . The power LED 0 lights
up red once and then flashes blue in 1 second intervals .
The remote trigger 8 is now in pairing mode for approx .
1 minute . If you do not pair the devices within 1 minute,
the remote trigger 8 automatically turns off .
Enable the Bluetooth
♦
search for Bluetooth
refer to the operating instructions of your smartphone .
♦ Select SSBS 3.0 A1 from the list of devices found on your
smartphone to pair the two devices . When pairing is
complete, the power LED 0 turns off .
♦ To turn off the remote trigger 8, press and hold the
button 9 for approx . 3 seconds . The power LED 0 flashes
red briefly 3 times and then turns off completely .
The next time you turn it on, the remote trigger 8 automatically
connects to the most recently connected smartphone. If your
smartphone does not automatically reconnect to the remote
trigger 8, you will have to connect the devices manually. For a
detailed description, refer to the operating instructions of your
smartphone.
If you want to pair another smartphone with the remote trig-
ger 8, press and hold the
The power LED briefly flashes blue twice and then flashes blue
in one second intervals. The remote trigger 8 is now in pairing
mode for about 1 minute and can be connected to another
smartphone.
SSBS 3.0 A1
button 9 for approximately 3 seconds
® function on your smartphone and
® devices . For a detailed description,
button e for approx. 2 seconds.
│ 9
US-EN
■