Advertisement
3. Hardware Setup
The TOSHIBA MCU FLASH WRITER is connected to a PC as shown in Figure 1 and Figure2
1. Connect one end of the USB cable to a USB Port on the PC
2. Connect the other end of the USB cable to the USB connector on the TOSHIBA MCU FLASH WRITER
1. Connect one end of the USB cable to a USB Port on the PC
2. Connect the other end of the USB cable to the USB connector on the TOSHIBA MCU FLASH WRITER
3. Connect one end of the cable to the connector on the TOSHIBA MCU FLASH WRITER
4. Connect the other end of the cable to the connector on the TARGET BOARD
Target Board
TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL
OFF-BOARD WRITING
Figure 1. Hardware SETUP1
ON-BOARD WRITING
Figure 2. Hardware SETUP2
T.S ELECTRONICS
Advertisement
