Overview; Preface; Entering The Special Management Mode - Canon Color imageCLASS MF9170c Service Manual

15.1 Overview

15.1.1 Preface

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
Special management mode is the mode for users to solve a problem by themselves when an error occurs.
However, information about this mode is not disclosed to users.
Operators at call center ask users the occurrence situation and if they decide that users can solve this problem, they tell uses to use a measure with this mode to solve
the problem by themselves.
If an issue cannot be solved with this mode, restore the setting to original.

15.1.2 Entering the Special Management Mode

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Turn ON the power of the host machine.
2) Press: Main Menu Key > Additional Func. key (Right Any key).
Additional function screen is displayed.
3) Press: 3 > 6 > 9 > *.
Mode transfers to the special management mode and maintenance code entry screen is displayed.
4) Enter the maintenance code (5 digit) and press OK.
Setting screen is displayed.
5) Switch from OFF to ON and press OK.
Pressing OK activates the setting.
Main Menu
If you restore the settings, switch from ON to OFF in the same procedure.
If you restore the initial settings, press Initialize key (left Any key) on the maintenance code entry screen.
- If the problem is not fixed after changing the setting, make sure to reset the setting.
- This machine receives jobs while changing the setting. In order not to receive jogs, disconnect the network cable before operation.
Additional Functions screen
[Additional Func.]
[Back]
[3 > 6 > 9 > ]
Maintenance Code
Entry screen
[Done] / [Back]
[OK]
Setting screen
F-15-1
[Back]
[OK] / [Back]
[Initialize]
[OK] / [Back]
Initializing
screen
Chapter 15
0020-4716
0020-4717
15-1