Sony BKM-FW50 Operating Instructions Manual page 12

Local Play
This screen lets you make settings for
display and playback of still image and
video files stored on a CF (CompactFlash)
card inserted in the memory card slot of the
BKM-FW50.
Play file/folder name
Specifies the location of the still image or
video files on the CF card. You can either
enter the location in the text box or click
the "Browse" button and select the file or
folder location on the screen that appears.
The "DCIM\101MSDCF" folder is set as
the factory default.
Repeat
Select this check box if the still images or
video files are to be played back repeatedly.
Save
Saves the settings made on this screen.
Play
Starts playback of the selected file or of the
still image/video files in the folder
specified in "Play file/folder name".
Stop
Stops still image/video playback that was
initiated by clicking the "Play" button.
12
Computer Operation
PC Presentation
This screen lets you start and stop the PC
Presentation function of the BKM-FW50.
By showing the contents of the computer
desktop on the display, the PC Presentation
function allows using the display as an
external monitor for the computer.
Note
To enable use of the PC Presentation
function, UltraVNC must be installed on
the computer.
UltraVNC is included on the CD-ROM
supplied with the BKM-FW50. Insert the
CD-ROM into the CD-ROM drive of the
computer and follow the on-screen
instructions to install UltraVNC.
Connect PC
Select this to enable the PC Presentation
function of the BKM-FW50. The following
items also need to be set.
IP Address:
Enter the IP address of the computer.
Password:
Enter the password that was set during
the installation of UltraVNC.
PC Resolution:
Select the screen resolution of the
connected computer.
If the resolution selected here differs
from the computer's actual resolution,
the screen will not display at the proper
size. Select a resolution so the screen
size matches the display.