Change Transmission Oil; Change Transmission Oil Filter - Hitachi ZW 310-6 Operator's Manual

Wheel loader
Hide thumbs Also See for ZW 310-6:
Table of Contents

Advertisement

Change Transmission Oil

--- every 1000 hours

Change Transmission Oil Filter

--- every 1000 hours
Clean Suction Strainer
--- every 1000 hours
f
NOTE: Be sure to replace the transmission oil filters and
clean the transmission oil suction strainer when changing
the transmission oil.
d
WARNING: Unexpected movement of the machine
may cause a serious accident. When parking the
machine, place F-N-R lever (1) in neutral and neutral
lever lock (3) in the lock ( ) position. Then, apply
parking brake (2) and stop the engine.
d
WARNING: Before changing oil, install articulation
stopper (lock bar) (4) to securely hold the front and
rear chassis to avoid an accident due to unexpected
machine movement.
IMPORTANT: Do not use transmission oils other than
those listed in the "Transmission Oil"
1. Operate the machine until the transmission oil is
heated to the appropriate temperature.
2. Park the machine following the same procedures as
described on page 7-7 for preparation of inspection/
maintenance work.
3. Install articulation stopper (4) to the front and rear of
the chassis by following the procedures described on
page 7-9.
MAINTENANCE
1
7-34
2
3
4
MNEC-01-036
90Z7-7-30

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents