Setting The E-Donpisha Function - Sony XC-7500 Operating Instructions Manual

Setting the E-DONPISHA Function

Use an adjusting rod to adjust the internal switches.
For details on internal switch locations, see "Internal
Switch Function" on page 82.
1
Select the RESET mode (ON) or NON-RESET mode
(OFF) by setting the S7-3 switch on the SG-235 board.
ON
OFF
2
If you selected the RESET mode in the step above,
select 1 V (OFF) or 3 V (ON) with the S7-2 switch on
the SG-235 board.
ON
OFF
3
Set the shutter speed.
For details, see "Shutter Speed Setting for Normal
Speed in the E-DONPISHA Mode" on page 68.
High speed
Set the S7-5 switch to ON and the S7-6 switch to OFF on
the SG-235 board.
ON
OFF
Low speed
Set the S7-6 switch to ON and the S7-5 switch to OFF on
the SG-235 board.
ON
OFF
71