Product-Specific Safety Instructions - Bosch Rexroth Hagglunds DUc MS2 Installation & Maintenance Manual

10/88 Hägglunds DUc Drive unit | Safety instructions
Bosch Rexroth AB, Version 06.2020, RE 15326-WA

2.6 Product-specific safety instructions

The safety instructions below apply to chapters 6: Transport and storage to 14:
Technical data
Danger from suspended loads
Danger to life or risk of injury, damage to equipment.
Improper transportation may cause the Hägglunds Drive Unit to fall down lead to
injuries e.g. crushing or broken bones or damage to the product.
▶ Make certain that the forklift truck or lifting device has adequate lifting
capacity.
▶ Never stand under or put you hands under suspended loads.
▶ Ensure your position is stable during transportation.
▶ Use your personal protective equipment (e.g. protective goggles, safety gloves,
suitable working clothes, safety shoes).
▶ Use suitable lifting device for transport and storage, installation and for
removal and repair. Make sure the electric motor is well mounted or anchored
when the lifting device is disconnected.
▶ Observe the prescribed position of the lifting strap.
▶ Observe the national laws and regulations on work and health protection and
transportation.
Pressurized machine/system
Danger to life or risk of injury, serious injuries when working on machines/systems
not shutdown! Damage to equipment.
▶ Always lockout-tagout electric motors before maintenance.
▶ Do not disconnect any line connections, ports and components when the
machine/system is pressurized.
▶ Always ensure that no energy is accumulated before any measures.
▶ Ensure that no pressure will enter the hydraulic system in the Drive Unit via
the hydraulic motor e.g. loads on the shaft or winch drum.
DANGER