Selecting An Installation Position - Huawei SUN2000-15KTL-50KTL-M3 Series User Manual

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Type Tools and Instruments
Person
al
protecti
ve
equipm
ent
(PPE)
Safety gloves
Safety boots

5.3 Selecting an Installation Position

Basic Requirements





Site Requirements



Mounting Structure Requirements



Issue 01 (2021-04-05)
Safety goggles
-
The SUN2000 is IP66-rated and can be installed indoors or outdoors.
Do not install the SUN2000 in a place where a person can easily be exposed to its
enclosure and heat sinks, because these parts are extremely hot during operation.
Do not install the SUN2000 in areas with flammable or explosive materials.
Do not install the SUN2000 in a place within children's reach.
The SUN2000 will be corroded in salt areas, and the salt corrosion may cause fire. Do
not install the SUN2000 outdoors in salt areas. A salt area refers to the region within 500
m from the coast or prone to sea breeze. The effect from sea breeze depends on weather
conditions (such as typhoon and season wind) or terrains (such as dams and hills).
The SUN2000 should be installed in a well-ventilated environment to ensure good heat
dissipation.
If the SUN2000 is installed in a place exposed to direct sunlight, the power may decrease
as the temperature rises.
You are advised to install the SUN2000 in a sheltered place or install an awning over it.
The mounting structure where the SUN2000 is installed must be fire resistant.
Do not install the SUN2000 on flammable building materials.
The SUN2000 is heavy. Ensure that the installation surface is solid enough to bear the
weight load.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
Anti-dust mask
-
34