Sony DNW-A75 Maintenance Manual page 147

A032 : DATA SAVE
This menu is used to save the adjustment data adjusted in
the ANALOG DT ADJUST mode into the NV-RAM of
the DT system.
c
Do not save the adjustment data into the NV-RAM when
abnormality is found during automatic adjustment (when
the message "# ADJUST INCOMPLETE #" is displayed).
n
When the power is turned off without saving the adjusted
data, the adjustment data returns to the former saved data.
To execute the data save
(1) Turn the search dial to set the * mark to "SAVE
ANALOG DT DATA" on the superimposed display.
(2) Press the SET button to execute the data save.
. On pressing it, the data transmission is initiated.
. During the data transmission, a message "SAV-
ING....." will be displayed on the superimposed
display.
(3) Check to see that the data transmission is completed.
. On completing the data transmission, a message
"DATA SAVED" will be displayed on the superim-
posed display.
(4) To exit the menu, press the MENU button once.
DNW-A75/A75P
Example of display and operation
ANALOG DT ADJUST
A032:DATA SAVE
*
NO OPERATION
SAVE ANALOG DT DATA
(1) 0
DIAL (2)
[SET]
(2) 0
ANALOG DT ADJUST
A032:DATA SAVE
NO OPERATION
*
SAVE ANALOG DT DATA
SAVING......
0
ANALOG DT ADJUST
A032:DATA SAVE
NO OPERATION
*
SAVE ANALOG DT DATA
DATA SAVED
(3)
0 Check
[MENU]
(4) 0
4-2. TAPE Maintenance Mode (M0)
4-2-8. ANALOG DT ADJUST Mode (A02)
4-57