3.14 [PCB ASSʼY, TCON], [PCB ASSʼY, DRIVER] Detachment
1.
Remove ③ and ④ from clamps.
Refer to A of P7 and be careful not to damage
Refer to A of P7 and be careful not to damage
of connector while removing connector ③ and ④.
2. Remove ⑤ from clamp, and remove ⑤ and ⑥
from [PCB ASSʼY, DRIVER].
3. Unfasten the six Screw-A screws and two Screw-
B screws, and remove PCB ASSʼY, DRIVER. (The
tightening torque for Screw-A is 60 N•cm.)
4. Remove the four FPC from TCON to panel.
Refer to C of P7 and be careful not to damage
of connector while removing connectors.
5. Unfasten the four Screw-A screws and four
Screw-B screws, and remove PCB ASSʼY, T-CON.
(The tightening torque for Screw-A is 60 N•cm.)
SCREW-A x6
⑤
②
Clamp
SCREW-A x4
Mark
Parts No.
DK8-0002-000
①
DM1-0050-000
②
DD2-0173-000
③
DD2-0122-000
④
DD2-0170-000
⑤
DD2-0172-000
⑥
⑥
SCREW-A
XB2-8300-805
SCREW-B
DD1-0646-000
①
③
⑥
SCREW-B x4
Page 25
Description
p
PCB ASS'Y, TCON
PCB ASS'Y, DRIVER
FPC, DRIVER, LED, LONG
FPC, DRIVER, LED
CABLE, DRIVER, LED1
CABLE, DRIVER, LED2
,
,
SCREW,W/WASHER,M3X8
SCREW, HEX, M3X14
④
Qty
y
1
1
2
1
1
2
10
4
③