Sealey APTT Instruction Manual

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instruction gloves
manual
1. SaFetY
WarninG! ensure Health & Safety, and local authority regulations are adhered to when assembling and using this item.
‰
locate item in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WarninG! erect item on level and solid surface such as a work bench (4 cabinet arrangement) or floor (8/12 cabinet arrangement).
‰
Do not use the item for any purpose other than that for which it is are designed.
8
ensure that the item is properly and securely assembled before loading cabinet boxes.
9
Items (mass) should be evenly distributed throughout the cabinets.
9
2. introDuction
i
Freestanding turntable for use with model no's APdC08, APdC24 & APdC48. Can support a total of 12 cabinet boxes, 3 on each side.
3. SpeciFication
i
model no.: .................................................................... APTT
nett weight: .............................................................. 12.27kg
4. contentS
fig.1
item 10 (Support spindles) not shown
4.1. Carefully unpack the product and check the contents against the list below. Should any items be missing or damaged make immediate
contact with your Sealey stockist.
Item no: description
1 Hex. spacer
2 m6 Hex Hd bolt
3 m6 lock washer
4 Spigot
5 earth cable
© Jack Sealey limited
cabinet box turntable
aptt
model no:
Qty. Item no: desciption
8 6 m10 lock nut
2 7 Self tapping screw
2 8 m6 Hex nut
I 9
I 10 Support spindle
Original Language Version
Qty.
I
4
6
Feet 4
6
APTT Issue 1 08/10/2018