Energy Device; Quick Install Guide - LG ESS Home 10 Owner's Manual

[Winter Mode Period]
Tap current value to display the setting menu. You can change the period
1. Select the currently selected value. Period setting menu is displayed.
2. Adjust [Month] and [Day] using S or W .
3. Select [APPLY] to complete the setting.

Energy Device

Select [ ] > [Energy Device] to display the Energy Device screen.
[AWhP]
Tap this switch to select [On] or [Off].
If its status is "Connection Available" , wait until it becomes "Connected. " If it is not connected to
the end, check heat pump connection is connected properly.
The status description of the energy device is as follows.
y Connection Not Allowed : AWHP setting is disabled
y Connection Available : AWHP setting is enabled and is not connected
y Connected : AWHP setting is enabled and is connected

Quick Install Guide

Select [ ] > [Quick install guide] to display the install guidance screen.
You can check the brief installation instruction on the [Quick install Guide] screen.
[eV]
Tap this switch to select [On] or [Off].
When 'EV Meter Enable' not setting, Error Popup
occurred.
Set the option [On] to enable EV monitoring.
Operating 23
2