Nokia WiFi Beacon 6 Product Guide
WAN
Enable Trusted Network
ICMP, Telnet, SSH, HTTP, TR069,
HTTPS
Trusted Network
Source IP Start
Source IP End
2
Select a WAN connection from the drop-down menu.
3
Click to enable or disable Trusted Network.
4
Select an access control level for each protocol: ICMP, Telnet, SSH, HTTP, TR-069, and HTTPS for
the WAN side and the LAN side.
5
Click Save.
6
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
7
STOP. This procedure is complete.
8.1.5
The Beacon 6 (HA-0336G-A) supports application configuration, including:
•
port forwarding
•
port triggering
•
DDNS
•
NTP
•
UPnP and DLNA
Procedure 32
Issue: 01
Choose a connection from the drop-down menu
Select the checkbox to enable or disable
Select an access control level for each protocol:
•
•
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Application configuration
Port forwarding configuration
3FE-47429-AAAA-TCZZA
WAN side—Allow, Deny, or Trusted Network Only
LAN side—Allow or Deny
Configure a Beacon 6 (HA-0336W-B)
103