Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 61

Supported touch gestures in process pictures
Icon
Supported touch gestures in controls
Icon
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
Gesture Function
Tap To select an object, tip on the corresponding position in the
process screen.
Drag with one To scroll horizontally or vertically, drag the process screen or
finger the object with one finger in the desired direction.
You scroll horizontal and vertical at the same time by dragging
vertically in screens.
Scale To zoom in or zoom out, drag simultaneously with two fingers.
Swipe To switch between two process screens, swipe horizontally
with one finger.
Keep pressed To call the shortcut menu, press for longer than a second on
the object or the link.
The function corresponds to a right-click.
Activation To call the WinCC system dialog boxes, swipe fast vertically
gestures from top to bottom.
Gesture Behavior
Tap To select a row, tap the row.
With corresponding
configuration of the control:
To select a cell.
Drag with two To move table and/or trends
fingers and axes, drag with two
fingers in the control window.
Operating the device
4.3 Supported gestures
Supported WinCC controls
Alarm control
Trend control
•
Process control
•
Ruler window
•
61