Viewing and Editing Logical Drives
Creating a Logical Drive
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Logical Drives", then press ENT.
Press t or s to select a logical drive,
then press ENT for two seconds. "LG"
refers to Logical Drive.
Press t or s to choose the desired
RAID level, then press ENT for two
seconds. "TDRV" on the LCD refers to
the drives that has not yet been
configured.
Press ENT, then use t or s to browse
through the drives. Press ENT again to
select/deselect the drives. "C=1 I=0"
refers to "Channel 1, SCSI ID 0".
After all the desired drives have been
selected, press ENT for two seconds to
continue. Press t or s to choose
"Create Logical Drive", then press ENT
for two seconds to start initializing the
logical drive. The maximum capacity of
the drives will be used in this logical
drive.
You may also choose "Change Logical
Drive Parameter", then press ENT to set
other parameters before initializing the
logical drive.
82
View and Edit
Logical Drives ×
LG=0
Not Defined
?
TDRV=4 Create
LG Level=RAID5 ?
C=1 I=0
1010MB
NEW DRV
SEAGATE
Create Logical
Drive
?
Change
Logical
Drive Parameter?
User's Guide