Set Up The Acer P600 Series Portable Navigator In Your Vehicle; Car Mount Installation Reminders; To Set Up The Device On Your Vehicle - Acer P600 Series User Manual

Portable navigator
Hide thumbs Also See for P600 Series:
Table of Contents

Advertisement

Set up the Acer p600 Series Portable Navigator in your
vehicle
1
2
3

Set up the Acer p600 Series Portable Navigator in your vehicle

The Acer p600 Series Portable Navigator comes with a car mount kit and a car charger
with which you can set up your device in your vehicle. You can choose to position the
car mount kit on the windshield using the suction cup, or on the dashboard using the
self adhesive disc connector.
CAUTION: Some countries prohibit the mounting of any electronic device in any location on
the vehicle dashboard. Be sure to check your local laws for acceptable mounting areas before
installing the car mount bracket.
NOTE: Some newer vehicle models may have a heat reflective shield embedded in the
windshield. This may in some cases obstruct the GPS signal reception. If you encounter this
problem in your vehicle, you need to purchase an external GPS antenna. For more
information, contact your local Acer dealer.

Car mount installation reminders

Install the car mount on a surface of your vehicle:
That is smooth, flat and free of dirt and oil
Where the driver can easily view/reach it without taking his/her eyes too far
off the road
Where the device will not obscure car controls nor restrict the driver's view of
the road
Far from the air bag deployment area

To set up the device on your vehicle:

This section shows how to install the car mount kit in your vehicle's windshield using
the suction cup. For dashboard installation procedures using the self adhesive power
disc connector refer to the
Clean the mounting surface with a glass cleaner and a clean cotton cloth.
If the ambient temperature is below 15°C (60°F) warm the mounting area and the
suction cup (e.g. with a hair dryer) to ensure a strong suction bond.
Install the car mount on the selected area.
Fix the suction cup to the selected area with the locking lever facing up.
Flip the locking lever away from you to create a vacuum between the suction
cup and the mounting surface.
Acer p600 Series Portable Navigator Getting Started Guide
First things first
.
xv

Advertisement

Table of Contents
loading

Table of Contents