Huawei TP3106 Commissioning Manual page 98

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Parameter
H.239 video bandwidth
Audio protocol
Audio channel
Dynamic bandwidth
Conference bandwidth
H.235 encryption
Preferred point-to-point IP
protocol
Network recording server
H.323 settings are obtained from the center telepresence codec and saved to the three
telepresence codecs.
Step 7 Configure security and service settings.
1.
Issue 01 (2015-02-12)
Leave the QoS parameter settings at their defaults, as shown in
If the telepresence system does not have any PSTN interface card installed, the PSTN
parameters will not be displayed. Skip sub-step 2.
Figure 4-45 QoS and PSTN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
2 Mbps
256 kbit/s
AAC-LD
Three-channel audio
Disable
Normal
Maximum interconnectivity
H.323
Disable
4 Parameter Configuration
Remarks
Set this parameter as
required.
Standard value for Huawei
internal network
Set this parameter as
required.
Set this parameter as
required.
Set this parameter as
required.
Set this parameter as
required.
-
Set this parameter as
required.
Set this parameter as
required.
Figure 4-45.
90