Table of Contents
Advertisement
1-5. Controls by Routing Switcher System
1-5-1. Specifications and Functions of Control Port
The Routing Switcher System has four kinds of remote ports : REMOTE 1 (standard S-BUS), REMOTE
2 (RS-422A), REMOTE 3 (RS-232C), and NETWORK (Ethernet)
BKS-R1617A and BKS-R3219A are equipped with two remote terminals supporting the two remote
systems: REMOTE 1 and REMOTE 2.
*1 : NETWORK (Ethernet) : IXS-6600/IXS-6700/BKS-R6010
DATA (Ethernet) : HKSP-R80 and HDS-X5800
The specifications and functions of the control ports are as follows.
REMOTE 1 BNC 75 Z Z Z Z Z
Protocol : S-BUS control
Data Transfer Speed
Max Cable Length
Function : Control of the equipment is executed by the S-BUS data link.
The various types of equipment related to the control, such as remote control panel, routing
switcher, and display unit, are connected to this data link.
REMOTE 2 D-sub 9-pin
Protocol :
RS-422A
Transfer speed
Data bit
Parity
Protocol
CART
CART+
CART++
Function :
With this, the one-to-one port communication between two units is performed. It is used
when a Sony routing switcher is used as a simple matrix switcher when receiving controls
from the controller of other manufacturers via RS-422A.
RS-232C D-sub 9-pin
Protocol : RS-232C
Transfer speed
Data bit
Parity
Check
Function : When connected with a personal computer, it performs program downloading and communi-
cation status monitoring.
1-4
312.5 kbps
500 m (BELDEN 8281 cable or equivalent)
38.4 kbps
8 bits
EVEN
Controllable size
16 x x x x x 16
O
O
O
38.4 kbps
8 bits
none
none
*1
. Among the four remote systems,
256 x x x x x 256
_
O
O
4093 x x x x x 4093
_
_
O
BKS-R3219A/R1617A I&SSM
Advertisement
Table of Contents
