Bosch UniversalBrush 3 603 CE0 0 Series Original Instructions Manual page 12

12 | English
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Charging the battery (see figure A)
Use only the power adaptors listed in the technical
u
data. Only these power adaptors are matched to the lith-
ium-ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure
the maximum performance of the battery, use the power ad-
aptor to fully charge the battery before first use.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool stops moving.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
can be damaged.
– To charge the battery, connect the Micro USB port (11)
to the power supply (13) via the Micro USB cable (12).
– Plug the power supply (13) into a plug socket.
The charging process will begin. The battery charge indic-
ator (10) lights up green.
When the battery is fully charged, the battery charge indic-
ator (10) goes out.
Recommended Applications (Surface Material)
Surface material
Brush (3)
Hard surfaces
Coated surfaces
Fabrics
Cast iron
Ceramic, porcelain
Aluminium, metal
Plastic, laminate
1 609 92A 6E5 | (30.11.2020)
Microfibre
pad (6)
Detailed
(blue)
brush (4)
● ○
○ ○
● –
– ○
● ○
● ○
● ●
Choosing the cleaning adapter
– Choose the cleaning adapter based on the intended use
(see "Recommended Applications (Cleaning Examples)",
page 12).
Incorrect use of a cleaning adapter can result in damage
to the surface to be cleaned (see "Recommended Applica-
tions (Surface Material)", page 12). First, test the clean-
ing adapter on an inconspicuous area.
Recommended Applications (Cleaning Examples)
Brush (3)
(heavy-duty cleaning work)
– Washbasins, tiles and tile joints in bathrooms and kit-
chens
– Tyre rims, patio furniture, tile joints in outdoor areas
Detailed brush (4)
(cleaning work in hard-to-reach areas)
– Corners and profiles
Pad holder (5) with microfibre pad (6) (blue)
(cleaning without leaving scratches)
– Pots, pans, sinks, hobs, kitchen appliances
– Fittings in bathrooms and kitchens
– Glass surfaces
– External surfaces of barbecues
Pad holder (5) with kitchen pad (7) (green)
(adherent impurities)
– Pots, pans, kitchen surfaces
Pad holder (5) with heavy-duty pad (8) (brown)
(burnt-in impurities)
– Baking trays, uncoated cooking utensils
– Ovens
Pad holder (5) with eraser melamin pad (9) (white)
(cleaning hard surfaces)
– Suitable for:
Worktops, glass surfaces, floors, skirting boards, doors,
shoes
– Not suitable for:
Surfaces made from wood, copper or stainless steel, non-
stick coatings, car paints
Cleaning adapter
Kitchen pad (7) Heavy-duty
(green) pad (8)
(brown)
– –
– –
– –
● ●
○ –
– –
– –
Eraser melamin
pad (9)
(white)
●
●
○
–
–
–
○
Bosch Power Tools