Table of Contents
Advertisement
SCSI Setup
Additional Options
Boot Device Options
Boot Target ID
The ultra-wide SCSI controller can start the operating system from a drive with any
SCSI address (ID). The SCSI ID selected here must correspond to the ID
configured on the boot device.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
The ultra-wide SCSI controller boots from the drive with the
displayed SCSI ID (default entry: 0).
Boot LUN Number
If your boot device has multiple LUNs (Logical Unit Numbers) and Multiple LUN
Support is Enabled, this option allows you to specify which LUN to boot from on
your boot device.
0, 1, 2, 3, 4, 5, 6, 7
The ultra-wide SCSI controller boots with the displayed LUN (default
entry: 0).
SCSI Device Configuration
Initiate Sync Negotiation
Devices on the SCSI bus (including the SCSI controller) communicate intelligently
with each other. Before data is transferred across the bus, the sending (initiating)
and receiving (target) devices negotiate and agree on how long each piece of data
will be, and how many pieces will be sent at a time - that is, they agree on how fast
to talk.
If you have operating problems with older SCSI devices, you should disable Initiate
Sync Negotiation. You may have to make settings on your SCSI devices (see the
SCSI device description).
A26361-D981-Z120-9-7419
Additional Options
English - 23
Advertisement
Table of Contents
