Setting Of The Switcher Output Signal 1; Setting Of The Switcher Output Signal 2 - Sony HDS-7150 Installation Manual

9-3-8. Setting of the Switcher Output Signal 1

(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[2] (INPUT/OUTPUT), [F4] (SWER OUTPUT), [F3] (OUTPUT ADJUST1)
The function key indications change as follows.
REF OUT
F1
(2) Press the [F2] (REF OUT PHASE) key.
Adjust the phase of the synchronization signal output using the knob (control knob) 4.

9-3-9. Setting of the Switcher Output Signal 2

(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[2] (INPUT/OUTPUT), [F4] (SWER OUTPUT), [F4] (OUTPUT ADJUST2)
The function key indications change as follows.
OUTPUT
SELECT
F1
(2) Press the [F1] (OUTPUT SELECT) key to move the cursor key to the desired output signal.
(3) Press the [F3] (WHITE CLIP) key.
Adjust the white clip value of the luminance signal using the knob (control knob) 4.
(4) Press the [F4] (DARK CLIP) key.
Adjust the dark clip value of the luminance signal using the knob (control knob) 4.
HDS-7150/7100
PHASE
F2 F3 F4 F5
CLIP
WHITE DARK
F2 F3 F4 F5
F6 F7 F8 F9 F10
F9 F10
F6 F7 F8
HDS-7150
9-3. Set-up
9-15