Page 1 ® Tecra A10 Series User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 178 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Regulatory Information
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9 The above Caution information applies to products that operate with an 802.11a device. EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
Page 10 This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. Approved Countries/Regions for the Intel Link 5000 Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 14 Romania San Marino Singapore South Africa Sweden Taiwan (United Arab Emirates) Virgin Islands Approved Countries/Regions for use for the Atheros AR5BXB72 2.4 + 5GHz 11n minicard This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 15 Slovenia Sweden UAE (United Arab Emirates) Uruguay Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure. Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation. Approved Countries/Regions for use for the Atheros AR5BXB63 11g minicard This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia and Herzegovina Canada Colombia Cyprus Ecuador...
Page 19 Approved Countries/Regions for use for the ® Intel PRO/Wireless 3945ABG Network Connection This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. NOTE An adhoc mode is available in Ch1-Ch11(802.11b/g), An Infrastructure mode is available in Ch1-Ch11 (802.11b/g)
Page 20: Bluetooth Wireless Technology Interoperability
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
Page 21 Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 22: Bluetooth Wireless Technology And Your Health
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 23: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 24 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 25 Never attempt to disassemble, adjust or repair an optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 26 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 Card is a trademark of Fuji Photo Film, Co., Ltd. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 28: Table Of Contents
Keeping yourself comfortable ...42 Precautions...42 Important information on your computer’s Setting up your computer ...44 Setting up your software...45 Registering your computer with Toshiba ...46 Adding optional external devices...46 Connecting to a power source ...47 Charging the main battery...49 cooling fan ...44...
Page 29 Hard Disk Drive Recovery using the Recovery media ...68 Checking the HDD operating status ...71 Installing drivers and applications...71 Using the Toshiba Dual Pointing Device ...71 Using the TouchPad Scrolling with the TouchPad Control buttons ...73 Disabling or enabling the TouchPad Using external display devices ...73...
Page 30 Playing an audio CD...104 Playing optical media ...105 Recording optical media ...105 Removing a disc with the computer on...106 Removing a disc with the computer off ...106 Caring for optical discs ...107 Toshiba’s online resources ...107 keyboard ...93 ® keys ...94 field...98 ®...
Page 31 Chapter 3: Mobile Computing...108 Toshiba’s energy-saver design...108 Running the computer on battery power ...109 Battery Notice ...109 Power management ...110 Using additional batteries ...111 Charging batteries...111 Charging the main battery...111 Charging the RTC battery...112 Monitoring main battery power...113 Determining remaining battery power...114 What to do when the main battery runs low ...115...
Page 32 Smart Card Reader ...138 Using the Bridge Media Adapter Slot ...139 Inserting memory media...139 Removing memory media...140 Using the i.LINK Using an expansion device...141 Using an Optional Toshiba Express Port Chapter 5: Utilities...142 TOSHIBA Assist ...143 Connect...144 Secure...145 Protect & Fix ...146 Optimize...147...
Page 33 TOSHIBA SD TOSHIBA SD Booting from a bootable SD card...159 Mouse Utility ...160 TOSHIBA Hardware Setup...161 USB Sleep and Charge Utility ...163 Starting the USB Sleep and Charge Utility...163 USB Sleep and Charge ...163 Enabling USB Sleep and Charge ...165 Power supply mode settings...165...
Page 34 DVD operating problems...200 Develop good computing habits ...201 Data and system configuration backup in the If you need further assistance...206 Before you contact Toshiba ...206 Contacting Toshiba ...207 Other Toshiba Internet Web sites...208 Toshiba’s worldwide offices...208 Appendix A: Hot Keys/TOSHIBA Cards...210 Hot Key Cards ...210...
Page 35 Keyboard hot key functions ...225 Appendix B: Power Cord/Cable Connectors... 226 Appendix C: TOSHIBA PC Health Monitor... 227 Enabling the TOSHIBA PC Health Monitor ...228 If a TOSHIBA PC Health Monitor message is Cleaning the cooling module...230 Glossary... 232 Index... 246 Pointing Device ...223 displayed...229...
Page 36: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 37 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 38: This Guide
Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Other Documentation
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Goes Wrong” on page 178.
Page 41: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 42: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 43 Avoid prolonged physical contact with the underside or surface of the computer. Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the “Avoid extended contact between computer base/palm rest and skin” section in the “Instruction Manual for Safety and Comfort”...
Page 44: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 45: Setting Up Your Software
NOTE Please handle your computer carefully to avoid scratching or damaging the surface. Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.
Page 46: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by double-clicking the Toshiba Resources icon on your desktop and then double-clicking Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 47: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 49: Charging The Main Battery
The computer’s main battery light gives you an indication of the main battery’s current charge: Glows amber while the main battery is being charged (AC adaptor connected) Glows green when the main battery is fully charged Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet Flashes amber when the main battery charge is low and it...
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time NOTE Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel.
Page 51: Your Computer's Features And Specifications
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high- precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page...
Page 53: Installing A Memory Module
Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module may be hot.
Page 54 Getting Started Adding memory (optional) If the computer is on, begin at step 1; otherwise, skip to step 3. Click Start, and then click the arrow next to the lock button in the lower-right corner of the Start menu. The Shut Down menu appears. Start (Sample Image) Shut Down menu Click Shut Down.
Page 55 Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover. (Sample Illustration) Removing the memory module slot cover Remove the memory module slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 56 Getting Started Adding memory (optional) NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module. NOTE For this model Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.
Page 57 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see Turn the computer right side up. Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Page 59 NOTE The following screen may appear when you turn on the power: If “Start Windows If one of the Safe Mode options is highlighted, it is best to press to go into Safe Mode, then shut down and restart the system, at Enter which time Windows When Safe Mode is suggested, this could be a sign that you may...
Page 60: Checking Total Memory
Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. Slot A (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screw.
Page 61: Hard Drive Recovery Utilities
If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover (complete steps and then check that the module is inserted completely into the socket and lined up squarely with the socket latches. NOTE From time to time, Windows “Windows...
Page 62: Creating Recovery Dvds
DVDs to copy the hard drive recovery. If your optical disc drive is not writable, contact Toshiba Customer Support to obtain the Recovery media for your system. The Toshiba Customer Support Center in the United States is (800) 457-7777, outside the United States it is (949) 859-4273. To create recovery DVDs: Click Start, All Programs, Toshiba, Recovery, and then Recovery Disc Creator.
Page 63: Hard Disk Drive Recovery Options
Hard Disk Drive Recovery options The following are the available hard disk drive recovery options: Recovering the original factory image (recommended recovery method) Hard Disk Drive Recovery using the recovery partition Erasing the hard disk Recovering the C: partition of the HDD without changing the current partition size Recovering the C: partition with a user specified size Hard Disk Drive Recovery using the Recovery media...
Page 64 If not skip to step (Sample Image) Product Recovery Menu screen When the Toshiba Recovery Wizard screen displays, select one of the options and then click Next. The options are: Recovery of Factory Default Software...
Page 65 Be sure to save your work to external media first. On the Toshiba Recovery Wizard screen, select Recovery of Factory Default Software, and then click Next. The Recovery of Factory Default Software screen appears.
Page 66 The Recovery Wizard allows you to delete all data and partitions from the hard disk. To delete the data and partitions from your hard disk: On the Toshiba Recovery Wizard screen, select Erase the hard disk, and then click Next. The next screen lists the two methods you can choose: Delete all data and partitions from the hard disk—This...
Page 67 To recover only your C: drive: On the Toshiba Recovery Wizard Screen, select Recovery of Factory Default Software, and then click Next. Select Recover without changing the hard drive partitions.
Page 68: Hard Disk Drive Recovery Using The Recovery Media
Be sure to save your work to external media first. To resize and recover your C: drive: On the Toshiba Recovery Wizard screen, select Recovery of Factory Default Software, and then click Next. Select Recover to a custom size partition.
Page 69 The Selecting a Process Screen will appear. Select one of the options and then click Next. The options are: Toshiba Recovery wizard System Recovery Options (Sample Image) Selecting a Process screen If your system offers a choice of Windows Vista bit operating system, select one at this time.
Page 70 Click Yes to continue. (Sample Image) Warning screen The Toshiba Recovery Wizard screen will appear. Please refer “Hard Disk Drive Recovery options” on page 63 the available recovery options. (Sample Image) Toshiba Recovery Wizard screen...
Page 71: Checking The Hdd Operating Status
Highlight the hard disk drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, Toshiba, Recovery, and then TOSHIBA Application Installer.
Page 72: Using The Touchpad
TouchPad in the preferred direction. Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. “Disabling or enabling the Toshiba Dual 223. ™ ™...
Page 73: Scrolling With The Touchpad
The TouchPad TouchPad setting, press TouchPad. For more information, see Toshiba Dual Pointing Device” on page Using external display devices Your computer comes with a built-in display, but you can also connect an external monitor or projector via the RGB (monitor) port.
Page 74: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Turn on the external device. Your computer will automatically detect the external display device and activate a screen with display options. Select the settings you desire and click Apply. Click OK. NOTE In the future you can change the display settings by pressing or by configuring the display properties settings.
Page 75: Adjusting The Quality Of The External Display
Swap—Switch primary display between internal display and external monitor when using extended desktop (Sample Image) Display options window Release the Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Page 76: Connecting A Printer
Getting Started Connecting a printer Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 77: Connecting An Optional External Diskette Drive
Connecting an optional external diskette drive Click Start, Control Panel, Hardware and Sound, and then under Printers, click Add a printer. The Add Printer Wizard appears. (Sample Image) Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes.
Page 78: Turning Off The Computer
Getting Started Turning off the computer To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. (Sample Illustration) Connecting an drive Turning off the computer Pressing the power button before shutting down the Windows operating system could cause you to lose your work.
Page 79 TECHNICAL NOTE: Before using the Shut Down option to turn off your computer, save your files and make sure all disk/disc activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again. Use the Sleep command to save your work, system settings, and current state of the desktop to memory, so that when you turn on the computer again, you will quickly and automatically...
Page 80 Getting Started Turning off the computer Sleep mode The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so that, when you restart the computer, you can continue working from where you left off.
Page 81: Using The Shut Down Command
Using the Shut Down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer. Use the following steps to turn off your computer using the Shut Down command: Click Start, and then click the arrow next to the Lock button in...
Page 82 Getting Started Turning off the computer Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen Click Power buttons and lid to display the actions that you can configure.
Page 83: Using And Configuring Hibernation Mode
Click Apply. Click OK. Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set. Restarting your computer To start the computer up again, press the power button until the on/off light glows green.
Page 84 Getting Started Turning off the computer To use any of these methods, you first need to enable them using the Power Options feature. Click Start, Control Panel, System and Maintenance, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized.
Page 85: Using And Configuring Sleep Mode
Power button action Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. Start menu power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you click the power button in the Start menu.
Page 86 Getting Started Turning off the computer Click Sleep. The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Sleep mode.
Page 87 To disable the computer from automatically entering Sleep mode, select Never. Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen Click Power buttons and lid to display the actions that you can configure.
Page 88: Closing The Display Panel
Getting Started Customizing your computer’s settings Click Apply. Click OK. Once the computer is configured, you can place it into Sleep mode by either pressing the power button or closing the display panel, depending on the Sleep options set. Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the on/off light glows green.
Page 89: Cleaning The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 90 Getting Started Caring for your computer Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device. The computer is now securely locked. (Sample Illustration) Attaching security lock cable...
Page 91: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 92 Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 93: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 94: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys Ctrl , and program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the keys at the top of the keyboard.
Page 95: Overlay Keys
Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard. (Sample Illustration) Numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric...
Page 96: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows If you prefer to open the program first, you have four options.
Page 97: Starting A Program From Windows
Starting a program from Windows If a program is not listed in the All Programs menu, you can start it from Windows your computer’s contents as a hierarchy or “tree.” You can easily see the contents of each drive and folder on your computer. To use this method, you should know the file name and location of the program’s executable file (this file ends with .exe).
Page 98: Starting A Program Using The Start Search Field
Learning the Basics Saving your work Starting a program using the Start Search field This example uses the Start menu’s Start Search field to start WordPad: Click Start to display the Start menu. The Start Search field appears at the bottom of the Start menu. Start Search field...
Page 99 Saving files ® In your Windows Click Browse folders. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name.
Page 100: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft file name with an extension of “.doc” is assumed to be a Microsoft Word file.
Page 101: Backing Up Your Work
Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available.
Page 102: Optical Drive Components
Learning the Basics Using the optical drive For these reasons, your computer may come with an optical drive. TECHNICAL NOTE: Your optical drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region.
Page 103: Inserting An Optical Disc
Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Inserting an optical disc To insert an optical disc into the drive: Make sure the computer is turned on. The drive will not open if the computer’s power is off.
Page 104: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 105: Playing Optical Media
Read/write data and multi-media files to recordable optical media. For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com. Learning the Basics Using the optical drive ® Player and use it to select and...
Page 106: Removing A Disc With The Computer On
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Page 107: Caring For Optical Discs
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 108: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you...
Page 109: Running The Computer On Battery Power
EasyGuard Optimize—to enable users to customize system settings to be more productive. *Toshiba EasyGuard some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com Running the computer on battery power The computer contains a removable Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet.
Page 110: Power Management
Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Customer Support Center. “Maintaining your battery” on page 123 ®...
Page 111: Using Additional Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 112: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 113: Monitoring Main Battery Power
NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Page 114: Determining Remaining Battery Power
Mobile Computing Monitoring main battery power HINT: Be careful not to confuse the battery light ( light ( When the on/off light flashes amber, it indicates that the system is suspended (using the Windows Power button AC power light On/off light Battery light Internal storage drive light (Sample Illustration) Power and battery light locations...
Page 115: What To Do When The Main Battery Runs Low
Highlight the power icon in the Notification Area. A pop-up message displays the remaining battery power as a percentage. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.
Page 116: Conserving Battery Power
Mobile Computing Monitoring main battery power To change the default notification settings: Click Start, Control Panel, Mobile PC, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. Click Change advanced power settings.
Page 117: Power Plans
There are various ways in which you can conserve power and extend the operating time of your battery: Enable Sleep or Hibernation, which saves power when you turn off the computer and turn it back on again Use the Windows These power-saving options control the way in which the computer is configured.
Page 118: Using A Hot Key To Set The Power Plan
Mobile Computing Monitoring main battery power To edit a plan or to edit advanced settings, continue to the following NOTE steps. Click Change Plan Settings to choose the plan you want to edit. This screen allows you to change basic settings. Click Change Advanced Settings to access settings for battery notification levels, internal storage drive power save time, etc.
Page 119: Changing The Main Battery
While continuing to press desired Power Plan. The Power Plan options are: Balanced, Power Saver, and High Performance. Release the The hot key card disappears. You are now in the selected mode. Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery.
Page 120 Mobile Computing Changing the main battery Slide the primary battery release latch up, or away from the center of the computer, while at the same time applying light pressure to the battery to slightly pull it away from the computer. (Sample Illustration) Unlocking the primary battery release While continuing to lightly pull on the battery, slide the secondary battery release latch down, or away from the center...
Page 121: Inserting A Charged Battery
If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 122: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 123: Maintaining Your Battery
Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 124: Disposing Of Used Batteries
If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, visit www.ToshibaDirect.com, select Recycling &...
Page 125: Traveling Tips
Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust. Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 126: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 127: Finding Your Way Around The Desktop
Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, Notification Area, and background pattern. Icons Start button (Sample Image) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 128 Exploring Your Computer’s Features Exploring the desktop Your desktop may contain other icons depending on your configuration. See Windows information on each icon and how to use it. Start button You use the Start button to: Start programs Open documents Adjust system settings Find files Access Windows...
Page 129: Setting Up For Communications
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet A way to connect to the ISP (for example modem/ ®...
Page 130: Connecting A Modem To A Telephone Line
For specific information about connecting to a LAN or WAN, consult your network administrator. Send a fax directly from your computer For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. ® access. If your computer has ®...
Page 131 Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line. Plug one end of a telephone cable (purchased separately) into the modem port on the side of the computer.
Page 132: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet...
Page 133: Connecting To The Internet
Connecting to the Internet To connect to the Internet, you need: A modem and telephone line, or a LAN connection A Web browser An Internet Service Provider (ISP) account Once you have established an ISP account, you can connect to the Internet.
Page 134: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on- one or in groups, by typing messages which are instantly viewed by others on their computer screens.
Page 135: Using External Speakers Or Headphones
Click Start, All Programs, Accessories, and then Sound Recorder. (Sample Image) Sound Recorder screen Click the Start Recording button. Speak normally into the microphone. When you have finished recording, click the Stop Recording button. The Save As dialog box appears. To save the file, type a file name, and then click Save.
Page 136: Web Camera
Exploring Your Computer’s Features Web Camera Web Camera (Available on certain models) Your computer may come with a built-in Web Camera. With this Web Camera you can do the following: Take pictures and record videos with your computer Chat with others and have them see you while using instant messaging (IM) programs Have video conference calls NOTE...
Page 137: Removing A Pc Card
NOTE You may first need to remove the card slot protector before you can insert a card. Insert the PC Card. (Sample Illustration) Inserting a PC Card When the card is almost all the way into the slot, push firmly but gently to ensure a firm connection with the computer.
Page 138: Setting Up A Pc Card For Your Computer
Exploring Your Computer’s Features Smart Card Reader Grasp the edges of the PC Card and slide it out of the slot. (Sample Illustration) Removing a PC Card Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer.
Page 139: Using The Bridge Media Adapter Slot
PDAs, digital cameras, digital video camcorders, etc. The Bridge Media Adapter slot may also support other types of media. For a complete list of supported media, visit Toshiba’s Web site at accessories.toshiba.com. NOTE Do not use the Copy Disk function for this type of media. To copy...
Page 140: Removing Memory Media
Exploring Your Computer’s Features Using the i.LINK Removing memory media Prepare the media for removal by clicking the Safely Remove Hardware icon in the Notification Area and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 141: Using An Expansion Device
For more information, see the accessories information package that comes with the device or visit accessories.toshiba.com. Using an Optional Toshiba Express Port Replicator with your computer If you purchase an optional Toshiba Express Port Replicator (not shipped with your system), you can connect this device to your computer’s expansion port.
Page 142: Chapter 5: Utilities
TOSHIBA Assist TOSHIBA Application Installer Supervisor password User password TOSHIBA Security Assist TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility TOSHIBA SD™ Memory Card Format Utility TOSHIBA SD™ Memory Boot Utility Mouse Utility TOSHIBA Hardware Setup...
Page 143: Toshiba Assist
Trusted Platform Module (TPM) Fingerprint Authentication Utility ConfigFree® TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist.
Page 144: Connect
Utilities TOSHIBA Assist Connect The features available in this category are: ConfigFree Bluetooth Bluetooth (Sample Image) TOSHIBA Assist window – Connect tab ® Connectivity Doctor ® Settings ® Local COM Settings...
Page 145: Secure
Secure The features available in this category are: Supervisor password User password TOSHIBA Security Assist (Sample Image) TOSHIBA Assist window – Secure tab Utilities TOSHIBA Assist...
Page 146: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The features available in this category are: TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 147: Optimize
The features available in this category are: TOSHIBA SD™ Memory Card Format Utility Mouse Utility TOSHIBA Hardware Setup TOSHIBA Zooming Utility TOSHIBA Button Support CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility (Sample Image) TOSHIBA Assist window – Optimize tab Utilities TOSHIBA Assist...
Page 148: Toshiba Application Installer
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, Toshiba, Recovery, and then TOSHIBA Application Installer.
Page 149: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 150: Using A Supervisor Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 151: Using A User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 152: Deleting A User Password
Utilities Setting passwords To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Password Utility. The TOSHIBA Password Utility window appears. (Sample Image) TOSHIBA Password Utility window Click Set. Enter your password, and then enter it again to verify.
Page 153: Toshiba Security Assist
TOSHIBA Security Assist The TOSHIBA Security Assist Utility acts as a “command center” where you can set up various passwords or other security features, and see how these features can be used with each other to increase security even further, or to simplify the ways that you protect your system.
Page 154 Utilities TOSHIBA Security Assist Log on Settings—Select this category to set up security options that protect individual user accounts. Password of current user: Check the status of the Windows currently logged on. Password of all users: Check the status of the Windows password for any additional Windows computer.
Page 155: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 156: Toshiba Hdd Protection Utility
Utilities TOSHIBA HDD Protection Utility TOSHIBA HDD Protection Utility The TOSHIBA HDD Protection utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery...
Page 157: Toshiba Sd Memory Card Format Utility
This utility is used to format SD Adapter slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format. The TOSHIBA SD Memory Card Format screen appears. (Sample Image) TOSHIBA SD Memory Card Format screen Select the drive corresponding to the SD memory card.
Page 158: Toshiba Sd Memory Boot Utility
Be sure to back up your data to external media before performing this procedure as data on the drive may be lost. Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card. The TOSHIBA SD Memory Boot Utility screen appears.
Page 159: Booting From A Bootable Sd Card
Power on the computer. During the boot process, press the The system displays the Boot menu. Use the arrow keys to select the SD/Floppy icon. Press the TOSHIBA SD™ Memory Boot Utility “TOSHIBA SD™ Memory for instructions). Enter key. Utilities...
Page 160: Mouse Utility
To access the Mouse utility: Click Start, Control Panel, and then Mouse under Hardware and Sound, or click the Mouse icon in the Optimize tab of TOSHIBA The Mouse Properties screen appears. (Sample Image) Mouse Properties screen The settings you can change are divided into these categories:...
Page 161: Toshiba Hardware Setup
Windows system. To access it: Click Start, All Programs, Toshiba, Utilities, and then HWSetup, or click the TOSHIBA Hardware Setup icon in the Optimize tab of The TOSHIBA Hardware Setup screen appears. (Sample Image) TOSHIBA Hardware Setup screen – General tab...
Page 162 Utilities TOSHIBA Hardware Setup Button Setting—Lets you set the resume speed for Sleep mode. If you want to use the fast resume option, be sure to connect the AC adaptor to the computer. CPU—Allows you to enable or disable CPU frequency switching modes Dynamically Switchable—This mode is the default setting for...
Page 163: Usb Sleep And Charge Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the USB Sleep and Charge Utility To start this utility click Start, All Programs, Toshiba, Utilities, and then USB Sleep and Charge. USB Sleep and Charge...
Page 164 Utilities USB Sleep and Charge Utility NOTE When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Page 165: Enabling Usb Sleep And Charge
Enabling USB Sleep and Charge This utility can be used to enable or disable the “USB Sleep and Charge function” group. Check the check box for the group to enable the “USB Sleep and Charge function” for the USB port assigned to that group. In the default state, the group is disabled.
Page 166: Toshiba Zooming Utility
Adobe Acrobat Icons on the desktop To access the TOSHIBA Zooming Utility: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Zooming Utility. The TOSHIBA Zooming Utility Properties screen appears. (Sample Image) TOSHIBA Zooming Utility Properties screen Select the desired option(s).
Page 167: Toshiba Button Support
For more information about how to use the TOSHIBA Zooming Utility, right-click the click Help. TOSHIBA Button Support TOSHIBA Button Support allows you to customize the TOSHIBA Assist and Windows located above the keyboard. To access TOSHIBA Button Support: Click the TOSHIBA Button Support icon in the Optimize...
Page 168: Cd/Dvd Drive Acoustic Silencer
Click Silence Mode to make the drive run more slowly and quietly for listening to music or audio files on a CD. Click Normal Mode to run the drive at normal speed for transferring data. ® session. If you shut down, TOSHIBA Assist.
Page 169: Toshiba Accessibility
TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the press it once, release it, and then press a function key to activate the hot key function.
Page 170: Trusted Platform Module (Tpm)
Trusted Platform Module (TPM) NOTE This section only applies to systems with TPM. Your Toshiba computer includes the TPM (Trusted Platform Module), which is a security encryption device for your system’s internal storage drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 171: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 172: Fingerprint Logon
Utilities Fingerprint Authentication Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the user’s Windows user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints;...
Page 173: Fingerprint Reader Limitations
Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. Soaked or swollen finger (e.g., after taking bath) Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate.
Page 174: Configfree
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 175: Configfree ® Utilities
Click Start, All Programs, Toshiba, Networking, and then ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon then click the desired utility. NOTE If your computer is not connected to a network, the ConfigFree icon in the Notification Area is displayed with an “X.”...
Page 176 Utilities ConfigFree® Status of Wireless Connection switch (Sample Image) Connectivity Doctor screen Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree network settings and devices. You can switch network settings simply by selecting the profile with the desired settings. If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network.
Page 177 To create a profile: Click the icon in the Notification Area. Move the pointer to Profile. Click Open Settings. The ConfigFree Profile Settings window appears. (Sample Image) ConfigFree Profile Settings window Click Add to start the Create Profile Wizard. Utilities ConfigFree®...
Page 178: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 179: Problems When You Turn On The Computer
Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 180 If Something Goes Wrong Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 181 Try turning the computer on again. If the computer starts normally, the AC adaptor may be defective and will need to be replaced (see the Toshiba Web site at accessories.toshiba.com). If the AC power light starts flashing, remove the battery, and continue with the steps below.
Page 182: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows Verify that the AC adaptor is the correct unit for your computer model. The computer may not be able to start from an AC adaptor that is rated for less current (amperage) than the computer requires, even if the rated voltage is correct, and the plug fits correctly in the DC-IN socket.
Page 183: Internet Problems
The Windows Safe Mode with Command Prompt Enable Boot Logging Enable low-resolution video (640x480) Last Known Good Configuration (advanced) Directory Services Restore Mode Debugging Mode Disable automatic restart on system failure Disable Driver Signature Enforcement Start Windows When you highlight each option using the arrow keys, Windows displays information about each option at the bottom after Description.
Page 184: The Windows Operating System Can Help You
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows and Support to troubleshoot the problem first.
Page 185: Fixing A Problem With Device Manager
The device most recently connected to the system is the one most likely to be causing a conflict. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer. Disable the device. For an older device, remove it from the computer.
Page 186: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The Resources tab, which lists resources assigned to the monitor, optional external optical drive, optional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources. The Driver tab, which displays the drivers being used by the device.
Page 187: Power And The Batteries
NOTE For this model Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A. Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery).
Page 188: Keyboard Problems
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 189: Display Problems
Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on. Using the computer’s TouchPad: Click Start, and then click the arrow next to the Lock button in the lower-right part of the Start menu.
Page 190 If Something Goes Wrong Resolving a hardware conflict Try adjusting the contrast and brightness controls on the external monitor. Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Personalize.
Page 191: Disk Or Internal Storage Drive Problems
Small bright dots appear on your TFT display when you turn on your computer. Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high- precision technology.
Page 192 If Something Goes Wrong Resolving a hardware conflict You can choose one or both options: Automatically fix file system errors Scan for and attempt recovery of bad sectors Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented.
Page 193: Optical Drive Problems
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 194: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict The disc will not come out of the drive when you click the eject button on the screen. Press the button on the optical drive itself. For additional information see does not slide out.” on page Sound system problems No sound is coming from the computer’s speakers.
Page 195 PC Card checklist Make sure the card is inserted properly into the slot. Make sure all cables are securely connected. Occasionally a defective PC Card slips through quality control. If another computer with a PC Card slot is available, try the card in that machine.
Page 196: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Select the item you wish to remove and click OK. Remove the device when told it is safe to do so. Never swap modules when the computer is in Hibernation or Sleep mode.
Page 197: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system’s V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. If Something Goes Wrong Resolving a hardware conflict...
Page 198: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi the device list in Device Manager (part of the Windows Panel, Hardware and Sound). Some Toshiba models may have a Wireless antenna ON/OFF switch even though they do not have an...
Page 199 Resolving a hardware conflict Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: Click Start, and then Network. Click View Status. Click Details. Verify that the DHCP Enabled setting is set to Yes. Click Close. Use IPCONFIG to verify that the computer has a useful IP address—one other than the private address of 169.254.xxx.xxx assigned by Windows...
Page 200: Dvd Operating Problems
“Checking device properties” on page 185 on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 201: Develop Good Computing Habits
Select Never on When to turn off the display. Click Save changes. The screen saver runs while you are watching a movie or title. If the screen saver is enabled, it runs on top of any movie or title you are watching. To disable the screen saver: Right-click on the desktop and click Personalize in the menu.
Page 202: Data And System Configuration Backup In The Windows
If Something Goes Wrong Develop good computing habits Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self-help books you can use to supplement the information in the manuals.
Page 203 Click Create. In the input field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. The Windows automatically stamps it with the current date and time, and displays a message that the restore point was successfully created.
Page 204 An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 205 General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft ® Office and Adobe Photoshop toolbars for your web browser).
Page 206: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 207: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 208: Other Toshiba Internet Web Sites
Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Page 209 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices United Kingdom Toshiba Information Systems (U.K) Ltd.
Page 210: Appendix A: Hot Keys/Toshiba Cards
Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or modify the following system...
Page 211: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Double-click the Card for the system function to be modified.
Page 212: Application Cards
TOSHIBA Zooming utility For more information, refer to Zooming Utility” on page Disc Creator utility This Application Card launches the TOSHIBA Disc Creator utility. TOSHIBA Hardware Setup utility For more information, refer to Hardware Setup” on page TOSHIBA Button Support utility For more information, refer to Support”...
Page 213: Using The Application Cards
Using the Application Cards To launch an application using the Application Cards: Press and hold the The TOSHIBA Cards display at the top of the screen. (Sample Image) TOSHIBA Card display Click the “stacked” card on the far right of the display. The Application Cards are hidden under this card.
Page 214: Hot Key Functions
Hot Keys/TOSHIBA Cards Hot key functions Click Start, All Programs, Toshiba, Utilities, and then Settings for Flash Cards. (Sample Image) Enabling and Disabling Application Cards Click the Open cards case button. The Card Case displays two rows of Cards. Cards that appear solid (not transparent) in the bottom row are enabled and can be selected when the Application Cards are displayed.
Page 215: Volume Mute
Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. Selecting this Card or pressing the hot key displays the following options:...
Page 216: Lock (Instant Security)
Hot Keys/TOSHIBA Cards Hot key functions Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: (Sample Image) Security options hot key function activates instant security. The user...
Page 217: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 218: Sleep Mode
Hot Keys/TOSHIBA Cards Hot key functions Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the...
Page 219: Hibernation Mode
Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page Selecting this Card or pressing the hot key displays the...
Page 220: Output (Display Switch)
Hot Keys/TOSHIBA Cards Hot key functions Output (Display switch) This TOSHIBA Card or hot key cycles through the power- on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 221: Display Brightness
To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. This hot key increases the screen brightness.
Page 222: Disabling Or Enabling Wireless Devices
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: Selecting this Card or pressing the hot key displays the...
Page 223: Disabling Or Enabling The Toshiba Dual Pointing Device
Disabling or enabling the Toshiba Dual Pointing Device This TOSHIBA Card or hot key enables/disables the Toshiba Dual Pointing Device. For more information on using the Toshiba Dual Pointing Device, see page Selecting this Card or pressing the hot key displays the...
Page 224: Zoom (Display Resolution)
Hot Keys/TOSHIBA Cards Hot key functions Zoom (Display resolution) This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options: [Space bar] (Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired...
Page 225: Keyboard Hot Key Functions
This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key turns the TOSHIBA Zooming Utility to zoom-out. This hot key turns the TOSHIBA Zooming Utility to zoom-in.
Page 226: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 227: Appendix C: Toshiba Pc
This information is used to identify and provide a notification of system conditions that may affect the performance of your Toshiba computer. It may also be used to help diagnose problems should the computer require service by Toshiba or Toshiba's authorized service providers.
Page 228: Enabling The Toshiba Pc Health Monitor
Toshiba's obligations under its standard limited warranty in any way. Toshiba's standard limited warranty terms and limitations apply. Enabling the TOSHIBA PC Health Monitor To enable the TOSHIBA PC Health Monitor, do one of the following: Click Start, All Programs, TOSHIBA, Utilities, and then PC Health Monitor.
Page 229: If A Toshiba Pc Health Monitor Message Is Displayed
We strongly recommend you have your computer checked by a Toshiba Authorized Service Provider. If you must use the computer for a short period of time before taking it to the Toshiba Authorized Service Provider, we recommend that you change the cooling method setting.
Page 230: Cleaning The Cooling Module
TOSHIBA PC Health Monitor Enabling the TOSHIBA PC Health Monitor Cleaning the cooling module The following information is dependent on if access to the cooling module is available. Access is available on certain models only. NOTE If you use the computer for a long period, the inside of the computer may become hot.
Page 231 Enabling the TOSHIBA PC Health Monitor Clean the cooling module using a small vacuum designed for computers, or other cleaning tool. (Sample Illustration) Cooling module Do not use a ballpoint pen or cotton swab for cleaning. It may clog NOTE the cooling module.
Page 232: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 DIMM alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 233 disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive HTML Hypertext Markup Language IEEE...
Page 234 Glossary SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 235 baud rate — The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) —...
Page 236 Glossary central processing unit (CPU) — The chip that functions as the “brain” of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character —...
Page 237 default — The setting selected by a program when the user does not specify an alternative setting. device — A component attached to the computer. Devices may be external (outside the computer’s case) or internal (inside the computer’s case). Printers, disk drives, and modems are examples of devices.
Page 238 Glossary double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the Windows button, unless otherwise stated. double-density diskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capacity of a high-density diskette). See also diskette, high-density diskette.
Page 239 file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) — The section of a storage drive that keeps track of the location of stored files.
Page 240 Glossary Hibernation — A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 241 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 242 Glossary network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen.
Page 243 Plug and Play — Generally, refers to the computer’s ability to automatically configure itself to work with peripheral devices. When capitalized, refers to a standard that, when followed by a device manufacturer, allows a computer to configure itself automatically to work with the device. pointing device —...
Page 244 Glossary RJ11 — A modular connector used on most U.S. telephone systems and direct-connect modems. The RJ11 connector is a 6-wire connector. ROM (read-only memory) — Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power.
Page 245 TFT display — See active-matrix display. universal serial bus (USB) — USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all- purpose USB port.
Page 246: Index
187 notifications 115 power plan 217 power plan hot key 118 real-time clock (RTC) 110 removing 119 BIOS Setup see TOSHIBA Hardware Setup Bridge Media Adapter inserting memory media 139 removing memory media 140 button power 52 start 128...
Page 247 set up 129 computer caring for 88 cleaning 89 moving 89 non-system disk or disk error message 181 not accessing disk drives 180 running on battery power 109 setting up 44 warning resume failure message computer lock 89 computing tips 91 ®...
Page 248 Index file extensions 100 file, backing up 92 files backing up 101 printing 100 restoring 101 saving 98 fingerprint authentication 171 fingerprint Authentication Utility using 171 Fn keys 94 function keys 94 hardware conflicts 184 resolving 185 headphones using 135 Help and Support ®...
Page 249 main battery removing 119 memory adding 52 problem solving 186 removing memory module slot cover 55 memory module inserting 56 installation 53 removing 60 memory module slot 55 microphone 134 modem connecting to telephone line 130 problem solving 197 monitor 73 connecting 73 not working 189 mouse...
Page 250 190 checking device properties 185 computer hangs when PC Card inserted 195 computer will not power up 179 contacting Toshiba 206 corrupted/damaged data files 192 Device Manager 185 disk drive is slow 192 display is blank 189...
Page 251 Index television adjusting display 75 Toshiba registering computer 46 worldwide offices 208 TOSHIBA Assist 143 Toshiba Dual Pointing Device 71 TOSHIBA Hardware Setup 161 Toshiba online resources 107 traveling tips 125 troubleshooting DVD player general problems 200 external keyboard 188...
Page 252 Index Help and Support 184 problem solving 182 ® Windows operating system desktop ® Windows Start menu 96 wireless networking 129 Wizards Connect to the Internet 130 World Wide Web 132 www 132...

Toshiba A10-S3501 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys/Toshiba Cards

Appendix B: Power Cord/Cable Connectors

Appendix C: TOSHIBA PC

Quick Links

Related Manuals for Toshiba A10-S3501

Summary of Contents for Toshiba A10-S3501