Bosch TPA 300 User Manual page 20

2.2. C
OPY SENSOR
This section is to recover a sensor ID if the "old" sensor can be cloned.
Scroll Right and left
to select the COPY
option.
Position the old
sensor to copy in
front of the tool
antenna.
The tool will read
the old sensor,
please wait a few
seconds.
After a short period
the sensor data is
displayed.
Position the blank
sensor in front of the
tool antenna to send
the existing ID to the
new sensor.
UM-BTPA1-6 18/54
TPA 300 user guide
= Continue
= Previous
To read
the sensor.
= Continue
= Previous
= To
program
the new
sensor
= To abort
and go
home
User guide BOSCH TPA 300