Going Into Standby Mode More Quickly - Toshiba 1110-S153 User Manual

NOTE: If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure to
save your work first.
NOTE: If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure to
save your work first.

Going into Standby mode more quickly

In addition, you can put the computer into Standby mode by
either pressing the power button or closing the display panel.
You can also specify an amount of time after which the
computer automatically goes into Standby mode.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1 Open the Start menu, then click Control Panel.
2 Click the Performance and Maintenance icon, and then
click the Toshiba Power Management icon.
3 Click the Advanced tab.
4 Select Standby for the options you want.
When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
5 Click OK.
6 Close the Control Panel.
Learning the Basics
Using Standby
85