BTS3900(A) GSM
Commissioning Guide
Context
Figure 4-7
Figure 4-7 Cascaded BTSs on the LMT
Procedure
Step 1 Check whether cascaded BTSs are configured on the LMT.
If...
Cascaded BTSs are configured
Cascaded BTSs are not configured See the BSC Initial Configuration Guide to configure
Step 2 In the left pane of the BSC6000 Local Maintenance Terminal window, select the level 2 BTS
and level 3 BTS respectively. Check whether each board on the Site Device Panel tab ipage s
displayed in green, as shown in
l
l
Issue 02 (2009-04-20)
shows the cascaded BTSs in the BSC6000 Local Maintenance Terminal window.
If the board is displayed in green, you can infer that the board is functional. End this task.
If the board is not displayed in green, you can infer that the transmission between cascaded
BTSs is abnormal. Go to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the BTS (Transmission Available)
Then...
Go to
Step
2.
the BTSs.
Figure
4-8.
Step
3.
4-7