Table of Contents
Advertisement
3-4 Handling Cassettes
3-1 Connecting External Equipment
3-4-1 Recommended Cassettes
3-4-2 Inserting and Ejecting Cassettes
Inserting a cassette
3-16
Chapter 3 Setting Up the VTR
You can use 1/2 -inch Digital BETACAM video cassettes only.
Digital BETACAM cassettes
S (small) cassettes
BCT-D6/D12/D22/D32/D40
L (large) cassettes BCT-D34L/D64L/D94L/D124L
Storage of cassettes
Store your cassettes at ambient temperature and humidity.
Always turn on the power of the VTR before attempting to insert or eject
cassettes.
fig 27
1
EJECT button
STANDBY button
1
Set the POWER switch to ON.
2
Before inserting the cassette, verify the following:
• There is no slack in the tape.
• "Error-10" is not displayed in the time counter display.
• The window of the cassette is facing up.
If there is any slack in the tape, refer to "Removing slack in the tape" on next
page. If "Error-10" is displayed in the time counter display, refer to "5-2
Moisture Condensation" on page 5-2.
2
S-size cassette
STOP button
Inserting a cassette
L-size cassette
Advertisement
Table of Contents
