Table of Contents
Advertisement
3-3-2 Setup file contents
(1) Display setup file
• File name: DISP_FORM.DEF
• Enter entire building display mode, number of block display buttons, number of tenant display buttons, number
of area display buttons, number of R.C. group/indoor display buttons, and schedule setting unit.
• For the entire building display mode, specify display unit when the entire building button is pressed.
[0: block, 1: tenant, 2: area, 3: R.C. group/indoor]
• For the number of buttons, enter the number of lateral buttons in each display mode. The number of
vertically arranged buttons is always 6.
• Specify schedule setting unit. [0: area, 1: R.C. group/indoor]
• Specify filter sign display mode. [0: not display, 1: display]
(2) Error code definition file
• File name: ERROR_CODE.DEF
• Enter reception code (hexadecimal), error code, error code name, display mode, and external
output.
• Specify display mode [0: not display (normal), 1: display].
• Specify external output [0: not output emergency, 1-64: emergency output No. (output to
corresponding number)].
(3) Touch Screen Controller IP address definition file
• File name: CONT_IP.DEF
• Enter the Touch Screen Controller IP address.
(4) Intelligent Server IP address definition file
• File name: LSV_IP.DEF
• Enter an Intelligent Server number and IP address.
(5) I/O Controller IP address definition file
• File name: IO_IP.DEF
• Enter the I/O Controller IP address.
• Only one address can be entered. Do not enter any IP address when the I/O Controller is not used.
(6) Building name definition file
• File name: BUILD_NAME.DEF
• Enter a building name.
(7) Block name definition file
• File name: BLOCK_NAME.DEF
• Enter a block number/name, and font size.
• Specify font size. [0 (small) -3 (large), 2: standard]
(8) Tenant name definition file
• File name: TENANT_NAME.DEF
• Enter tenant numbers/names (up to 512), and font size.
• Specify font size. [0 (small) -3 (large), 2: standard]
(9) Area name definition file
• File name: AREA_NAME.DEF
• Enter area numbers/names (up to 512), and font size.
• Specify font size. [0 (small) -3 (large), 2: standard].
(10) R.C. group/indoor name definition file
• File name: AC_NAME.DEF
• Enter R.C. group/indoor numbers/names (up to 512), and font size.
• Specify font size. [0 (small) -3 (large), 2: standard]
31
Advertisement
Table of Contents
