Removing The Toner Sensor And Multi Pickup Sensor Unit (Mf4820D); Preparation; Procedure - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Controller System > Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4820d) > Procedure
Note:
The below picture shows how to wind the harness.
4 Disassembly/Assembly > Controller System > Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4820d) > Procedure
Removing the Toner Sensor and Multi Pickup Sensor
Unit (MF4820d)

■ Preparation

1) Remove the left cover
2)Remove the copyboard cover and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.

■ Procedure

1)Remove the scanner cover[1]
• 2 screws(black TP)[2]
F-4-482
x2
4-189
[2]
[1]
F-4-483
4-189