Yamaha AW4416 Operation Manual page 194

Professional audio workstation
Hide thumbs Also See for AW4416:
Table of Contents

Advertisement

Chapter11—Song management
3. Move the cursor to the list in the upper part of the display, and use the
[DATA/JOG] dial to select the import source song from which you wish
to import mixer data.
4. Press the [ENTER] key.
An "E" symbol will appear at the left edge of the list, and the corresponding song
will be selected as the import source for mixer data.
• The current song cannot be selected as the import source. If you execute
• It is not possible to select two or more songs as the import source.
5. Move the cursor to the MIXER IMP button and press the [ENTER] key.
The MIXER DATA IMPORT popup window will appear.
6. Turn on the button(s) for the type(s) of mixer data that you wish to
import. (You may select more than one.)
• SCENE MEM. button ....Scene memories
• AUTOMIX button .........Automix
• TEMPO MAP button .....Tempo map
• LIBRARY button ...........Libraries (channel/EQ/dynamics/effect)
7. To execute the Import, move the cursor to the OK button and press the
[ENTER] key.
Tip!
If you decide to cancel the Import command without executing, move the cursor to
the CANCEL button and press the [ENTER] key.
184
— Operation Guide
Import when the current song is marked with an "E" symbol, an error message
will be displayed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents