Setting The Volume; Using Headphones; Using The Speaker Switch - Yamaha Clavinova CLP-230 Owner's Manual

Before Using the Clavinova

Setting the Volume

Initially set the [MASTER VOLUME]
playing, re-adjust the
CAUTION
Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged.
TERMINOLOGY
NOTE

Using Headphones

Connect a pair of headphones to one of the
jacks.
Two jacks are provided.
[PHONES]
You can connect two sets of standard stereo head-
phones. (If you are using only one pair of headphones,
you can plug them into either jack.)
Using the Headphone Hanger
A headphone hanger is included in the CLP-240/230
package so that you can hang the headphones on the
Clavinova. Install the headphone hanger using included
two screws (4 10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on
the hanger. Otherwise, the Clavinova or the hanger
may be damaged.

Using the Speaker Switch

This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of
ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.
12
CLP-240/230 Owner's Manual
slider about halfway between the "MIN" and "MAX" settings. Then, when you start
[MASTER VOLUME] slider to the most comfortable listening level.
MIN
The level decreases.
MASTER VOLUME:
The volume level of the entire keyboard sound
You can also adjust the [PHONES] output level and the AUX IN input level using the [MASTER VOLUME] slider.
[PHONES]
headphones is not connected.
MAX
MASTER VOLUME
The level increases.
bottom surface
OFF
ON
NORMAL
HP. SW
SPEAKER
standard
PHONES
stereo
phone plug
OFF
ON
NORMAL
HP. SW
SPEAKER
PHONES