12.5. Removing the CF Slot Block
1. Remove the 3 screws.
2. Disconnect the connector. (CN9)
3. Release the CF slot board block.
Screw
<A>:XYN2+J10FN
12.6. Removing the Inverter Board
1. Disconnect the connector(CN3) and Unclip the 2 hooks.
2. Remove the back Lamp Wier and release the inverter
block.
3. Remove the tape three places and remove the inverter
board.
12.7. Removing the LCD Block
1. Remove the LCD flexible cable and touch panel flexible
cable from the connector. (CN2,CN3)
2. Remove the 4 screws and release the LCD Block.
Screw
<A>:DXQT2+G3L
3. Remove the LCD block from LCD holder.
12.8. Removing the Power/IF Board
1. Remove the 3 screws and release the power/IF board.
Screw
<A>:DXQT2+G4L
12.9. Removing the Keyboard Unit
1. Remove the 2 screws.
2. Release the keyboard unit and keyboard holder.
Screw
<A>:DXQN17+A3FZL
15-2