Using The Integrated Spo2 Monitor (Optional); Using The Integrated Resuscitation System (Optional); Mounting Ancillary Equipment - GE Panda iRes Warmer Operation And Maintenance Manual

Using the Integrated SpO
The Panda iRes Warmer can be equipped with its own integrated SpO
the control panel screen.
Refer to the SpO Monitor setup, check out and use instructions in the SpO
2
Operation and Maintenance Supplement.

Using the Integrated Resuscitation System (optional)

Refer to the integrated Resuscitation System for setup, check out and use instructions in the Bag and
Mask Option, Operation and Maintenance Supplement or the Resuscitation System - T-piece Option
Operation and Maintenance Supplement, depending on your Panda iRes Warmer's resuscitation
equipment setup.
Mounting ancillary
WARNING:
Overloading the shelves and accessory rails can affect the stability of the unit. Always try
to evenly distribute the weight of accessories on both sides of the unit for a more balanced
load. Limit the total load on the accessory rails to 22 kg. Do not mount more that 19 kg to
one rail. Do not use more than one GCX Mount on the accessory rails at one time.
WARNING:
Do not transport with pass through drawer(s) open.
3-22 Panda iRes Warmer
Monitor (optional)
2
equipment
M1110737 006
Monitor that is operated from
2
- Masimo SET Option,
2
© 2007 General Electric Company, all rights reserved