UNIVERGE SV8100/SV8300
System Hardware Manual
6.
Using supplied screws, secure the chassis to the assembled
CHS STAND KIT (K). Refer to
Brackets to Chassis with Screws
Figure 5-24 Attach Floor Mount Brackets to Chassis with Screws
7.
Align screw holes in floor mount bracket with pre-drilled holes
in floor.
8.
Using supplied screws, secure the CHS STAND KIT (K) to the
floor. Refer to
Figure 5-25 CHS2U-US/CHS1U-US Chassis
Stand Mount on page
To prevent damage to the 19" chassis due to
falling, install the chassis with stand mount
brackets.
Figure 5-24 Attach Floor Mount
for screw location.
5-24.
Issue 1.0
5 - 23