Advertisement
INSTALLATION PROCEDURE
3.
3.1 Removing the Covers
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
B-4x5 Screw
4. Fully open the Top Cover.
Side Panel (L)
B-4x5 Screw
Top Cover
3/15
5. Release the tab on the right end by pushing it, then remove the Front Panel.
Front Panel
3.2 Attaching the Ribbon Guide
1. Turn the Head Lever to the FREE position and gently open the Ribbon Shaft Holder
Plate.
Head Lever
Tab
4/15
Ribbon
Shaft
Holder
Plate
Advertisement
